Huawei posted on their websites the official technical specifications and photos of the latest tablet Huawei MediaPad T2 10.0 Pro. Actually, "tablets", because there are several different versions. It's always worth paying attention to it when shopping.
Huawei MediaPad T2 10.0 Pro has a 10-inch display with 1920x1200 pixels with brightness of 300 nits, runs on Android 5.1 Lollipop with EMUI 3.1, and the design was based on Snapdragon 615. The tablet supports Wi-Fi both 2 and 5 GHz. It has two cameras: the rear with an 8 megapixel matrix, LED flash and f/2.0 and a 2-megapixel front one. The battery supporting this marvel has a capacity of 6660 mAh and is to ensure - according to the manufacturer - 700 hours in stand-by mode.
photo: Huawei
Users usually have mocking comments on the telephone possibilities of tablets (especially if you have 10 inches), but the first line of division in the specifications runs just between the devices only with Wi-Fi, and these mobile networks enabled, with data transmission. According to information on the manufacturer's website, only one version of the tablet supports only Wi-Fi: FDR-A01w. Note the characteristic letter "w" in the alphanumeric symbol. The rest deals with calls, as well as support for data exchange via LTE.
photo: Huawei
The second difference between the versions is the amount of RAM and ROM. Depending on which tablet we buy, we will have 2 GB of RAM and 16 GB flash ROM, or 3 GB of RAM and 32 GB of flash ROM. The third and final difference is the network service. All the differences that we could catch, can be found on the tablet card in the "additional information" on the data sheet of the device..
photo: Huawei
Huawei MediaPad T2 10.0 Pro has dimensions 259.1 x 156.4 x 8.5 mm and weighs 495 g. At the moment there is no information on availability and prices of the various versions.
Source Huawei
